[TR] gearbox reverse switch

[auprichard uprichard.net]

I have just done a search and cannot find any mention of a 5/8 x 13 tpi.  5/8 x 11, 18 and 24 tpi are all readily available, and ½ x 13, but no 5/8 x 13.

Andrew

From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of David P
Sent: Thursday, December 30, 2021 10:05 AM
To: triumphs at autox.team.net
Subject: Re: [TR] gearbox reverse switch


the switch is a 5/8ths x 13TPI
On 12/30/2021 6:03 AM, auprichard uprichard.net wrote:
Listers:

For various reasons, I find I have to put a TR3 top cover in a TR250 - so I need to drill a hole for a reverse / back-up switch.

Does anyone know the drill and tap sizes I should be using? Thanks in advance.

Andrew Uprichard
Jackson, Michigan



** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **



Donate: http://www.team.net/donate.html

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive



Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com

--

Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World go here: WWW.PORTERBIKES.COM/<http://WWW.PORTERBIKES.COM/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20211230/4c57c195/attachment.htm>