[TR] gearbox reverse switch

[David P]

the switch is a 5/8ths x 13TPI

On 12/30/2021 6:03 AM, auprichard uprichard.net wrote:
>
> Listers:
>
> For various reasons, I find I have to put a TR3 top cover in a TR250 - 
> so I need to drill a hole for a reverse / back-up switch.
>
> Does anyone know the drill and tap sizes I should be using? Thanks in 
> advance.
>
> Andrew Uprichard
>
> Jackson, Michigan
>
>
> **triumphs at autox.team.net  **
>
> Donate:http://www.team.net/donate.html
> Archive:http://www.team.net/pipermail/triumphs   http://www.team.net/archive
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com

-- 
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World go here:WWW.PORTERBIKES.COM/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20211230/7e257c90/attachment.htm>