[TR] TR4A steering rack

[Tony Drews]

I THINK that's a locating lug that should have a corresponding peg on 
the aluminum mount between the rack and the bracket on the frame.  If 
so, the mount should pretty much seal up the hole. However I'm not 100% 
sure about that.

Regards, Tony

On 8/8/2021 1:46 PM, Cliff Hansen wrote:
> I have a new steering rack (original is judged not rebuildable due to 
> wear on the rack gear teeth). On the passenger side, on top of the 
> tube, there is the hole shown in the attached photo.
>
> Should there should be a plug of some sort? In the original that hole 
> is filled by a rubber button from the inside, perhaps as part of a 
> bushing of some sort. The hole will be under the mount, I intend to 
> use a solid rack mount so I can’t rely on the mount bushing to seal 
> against water.
>
> I will call the vendor tomorrow, I thought I’d ask this group also. 
> I’d install it today if I had confidence that all is as it should be.
>
> Thanks
>
> Cliff
>
>
>
> Sent from my iPhone
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210808/a4ae8fa2/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 124968 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210808/a4ae8fa2/attachment.jpeg>