[TR] Stag carb adapter insulators

[pdqtr6]

Put one on each side and never use sealant on intake manifold gaskets.Sent from my Galaxy
-------- Original message --------From: Frank Magnus son <fmags at cox.net> Date: 8/4/21  8:25 AM  (GMT-05:00) To: Sujit Roy <triumphstag at gmail.com> Cc: Triumphs <triumphs at autox.team.net> Subject: Re: [TR] Stag carb adapter insulators Awesome! Thanks!Sent from my iPhoneOn Aug 4, 2021, at 12:22 AM, Sujit Roy <triumphstag at gmail.com> wrote:The tr6 shows a similar spacer and a gasket on either side.On Tue, Aug 3, 2021, 3:16 PM Frank Magnusson <fmags at cox.net> wrote:
I'm about to replace the insulators/spacers between the carbs and the pedestal adapter along with the gaskets and not sure if I need a gasket on each side of the insulator/spacer or only on the carb side.  Makes sense to have one on each side.  Rimmers catelog implies just one.  Also do they go on dry or with sealant?  Thanks.


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210804/81bd1b53/attachment.htm>