[TR] 62 TR4
dave
dave at ranteer.com
Sat Sep 5 14:51:48 MDT 2020
Those are bolts? I can push them out the other side? Never occurred to me!
From: auprichard at uprichard.net <auprichard at uprichard.net>
Sent: Saturday, September 5, 2020 3:40 PM
To: 'dave' <dave at ranteer.com>; '*Triumphs List' <triumphs at autox.team.net>
Subject: RE: [TR] 62 TR4
Shouldn’t need any pullers. That tie rod lever should come off now the nuts are off the long bolts – try tapping the bolts out. Then two more bolts and the caliper plate and dust shield should come off. Then unscrew the vertical link from the trunnion.
Andrew Uprichard
Jackson, Michigan
From: Triumphs <triumphs-bounces at autox.team.net <mailto:triumphs-bounces at autox.team.net> > On Behalf Of dave
Sent: Saturday, September 5, 2020 3:45 PM
To: *Triumphs List <triumphs at autox.team.net <mailto:triumphs at autox.team.net> >
Subject: [TR] 62 TR4
So i am here, and trying to figure out the best way to get the trunion and the piece in front of it off.
I have a gear puller but it doesn't seem right for that piece with the two studs.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200905/370a25fb/attachment.htm>
More information about the Triumphs
mailing list