[TR] Wheel Stud Question
Randy and Valerie DeRuiter
deruiterville at hotmail.com
Tue Sep 1 11:23:54 MDT 2020
Jim-
The 4A has press in studs front and back as on a TR6 - I did the same for my TR6. For the back yes, no need to remove hub. For the front, I'm fairly sure I had to take the rotor off to put longer studs in. More involved but pretty easy.
Randy
________________________________
From: Triumphs <triumphs-bounces at autox.team.net> on behalf of Jim Henningsen <trguy75 at gmail.com>
Sent: Tuesday, September 1, 2020 10:37 AM
To: 'Triumphs' <triumphs at autox.team.net>
Subject: [TR] Wheel Stud Question
Can you replace the shorter wire wheel studs with the longer standard wheel
studs on the front and rear without having to separate the hubs? I haven't
done this in a long time and curious if you can switch these outs easily on
a 67 TR4A IRS.
Thanks,
Jim Henningsen
Ocala, FL
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/deruiterville@hotmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200901/0fe0bad8/attachment.htm>
More information about the Triumphs
mailing list