[TR] Sealing block (TRF ref. 151134)

[Frank Fisher]

 and if you go to a metric size the next size up can be very minimal.Frank
    On Sunday, October 25, 2020, 12:13:24 PM PDT, Bud Rolofson <levilevi at comcast.net> wrote:  
 
 Rethread it to the next size up. That's what I did and the engine never knew the difference. Being aluminum it's, of course, real easy to tap.Bud

Sent from my Commodore 64
On Oct 25, 2020, at 11:52 AM, David Friedlander <forzion7 at gmail.com> wrote:


Hey all!
Looks like I've got some stripped threads in the aluminum sealing blockon my TR6. Anyone have one they'd care to sell me from a parted-out engine? I'd rather go with a new-to-me original piece than going the helicoil route.
Thanks all!

Dave Friedlander'74 Six

<image.png>


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/levilevi@comcast.net

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201027/ca9d413e/attachment.htm>