[TR] TR4A IRS Rear Trailing Arm Issue

[Jim Henningsen]

Thanks,
They are aluminum. Good suggestions.  Now to know the exact size of the hole?
Jim

> On Oct 4, 2020, at 4:52 PM, Rye Livingston <ryel at mac.com> wrote:
> 
> I forget, steel or aluminum?  If steel you could weld a washer in place.  If aluminum, take it to a welder who is versed in welding aluminum and have it welded over and drill a new hole?
> 
> Rye
> 
>> On Oct 4, 2020, at 1:42 PM, Jim Henningsen <trguy75 at gmail.com> wrote:
>> 
>> List:
>> I decided to take a break on my TR6 engine bay reinstall and work on the 67
>> TR4A IRS.  After dissembling the drivers side rear suspension, I noticed the
>> hole in the rear of the arm for the shock link is wallowed out.  What's the
>> correct diameter of the hole?  I don't have a spare trailing arm to check
>> and any ideas on creative solution to fix it?  
>> 
>> 
>> 
>> Thanks,
>> Jim Henningsen
>> Ocala, FL
>> 61 TR3A
>> 62 TR4
>> 67 TR4A
>> 75 TR6
>> 81 TR8
>> <IMG_6154.JPG>** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ryel@mac.com
>