[TR] TR4A IRS Rear Trailing Arm Issue

Rye Livingston ryel at mac.com
Sun Oct 4 14:52:00 MDT 2020


I forget, steel or aluminum?  If steel you could weld a washer in place.  If aluminum, take it to a welder who is versed in welding aluminum and have it welded over and drill a new hole?

Rye

> On Oct 4, 2020, at 1:42 PM, Jim Henningsen <trguy75 at gmail.com> wrote:
> 
> List:
> I decided to take a break on my TR6 engine bay reinstall and work on the 67
> TR4A IRS.  After dissembling the drivers side rear suspension, I noticed the
> hole in the rear of the arm for the shock link is wallowed out.  What's the
> correct diameter of the hole?  I don't have a spare trailing arm to check
> and any ideas on creative solution to fix it?  
> 
> 
> 
> Thanks,
> Jim Henningsen
> Ocala, FL
> 61 TR3A
> 62 TR4
> 67 TR4A
> 75 TR6
> 81 TR8
> <IMG_6154.JPG>** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ryel@mac.com



More information about the Triumphs mailing list