[TR] TR6 hood release cable

Jim Henningsen trguy75 at gmail.com
Sun Oct 4 10:23:49 MDT 2020

Dave and Edward:

I Found it.  Thanks, just wanted to check first since it has been so long.  One step closer.



From: DAVID MASSEY <dave1massey at cs.com> 
Sent: Sunday, October 04, 2020 8:53 AM
To: trguy75 at gmail.com; triumphs at autox.team.net
Subject: Re: [TR] TR6 hood release cable


There is a smaller hole just above the harness hole and below the clutch master cylinder.  It is directly inline with the operator end of the cable under the dash.  I tried to take a picture but there are too many other things cluttering the image and this is one case where a picture isn't worth the dozen or so words it took to describe it.





-----Original Message-----
From: James Henningsen < <mailto:trguy75 at gmail.com> trguy75 at gmail.com>
To: TR3/6 < <mailto:triumphs at autox.team.net> triumphs at autox.team.net>
Sent: Sat, Oct 3, 2020 2:59 pm
Subject: [TR] TR6 hood release cable

Can someone tell me which firewall hole does the TR6 LHD hood release cable come out of.  Reinstalling after being on car for 10 years and don’t remember.  Through wiring harness grommet?  


Jim Henningsen 

**  <mailto:triumphs at autox.team.net> triumphs at autox.team.net **


Donate:  <http://www.team.net/donate.html> http://www.team.net/donate.html

Archive:  <http://www.team.net/pipermail/triumphs> http://www.team.net/pipermail/triumphs  <http://www.team.net/archive> http://www.team.net/archive


Unsubscribe/Manage:  <http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com> http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201004/61c51314/attachment.htm>

More information about the Triumphs mailing list