[TR] TR6 hood release cable
DAVID MASSEY
dave1massey at cs.com
Sun Oct 4 06:53:13 MDT 2020
There is a smaller hole just above the harness hole and below the clutch master cylinder. It is directly inline with the operator end of the cable under the dash. I tried to take a picture but there are too many other things cluttering the image and this is one case where a picture isn't worth the dozen or so words it took to describe it.
Dave
-----Original Message-----
From: James Henningsen <trguy75 at gmail.com>
To: TR3/6 <triumphs at autox.team.net>
Sent: Sat, Oct 3, 2020 2:59 pm
Subject: [TR] TR6 hood release cable
Can someone tell me which firewall hole does the TR6 LHD hood release cable come out of. Reinstalling after being on car for 10 years and don’t remember. Through wiring harness grommet?
Thanks.
Jim Henningsen
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201004/53ff0f0a/attachment.htm>
More information about the Triumphs
mailing list