[TR] TR 6 voltage stabilizer

[DAVID MASSEY]

 The gauges work off of the same fuse as the wipers, turn signals, heater fan, reverse lights and a few other things.  If these work then it is not the fuse.  But as I always say, check the easy things first.  

It is attached to the back side of the Speedometer (or is it the tach?).  The usual failure mode for the stabilizer is the gauges read high.  If they don't work at all it is likely a wire that came loose.
Good luck.
 
Dave 

 
 
-----Original Message-----
From: JOSEPH MATO <joemato at sbcglobal.net>
To: TR List <triumphs at autox.team.net>; triumphs-request at autox.team.net <triumphs-request at autox.team.net>
Sent: Sun, Oct 4, 2020 6:35 am
Subject: [TR] TR 6 voltage stabilizer

The fuel and temp gauges are inoperative and I am trying to find the voltage stabilizer to troubleshoot. Trying to get up to speed on 1970's LBC tech. Could someone please tell me where I can locate it? Thanks, Joe Mato
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201004/58c1af96/attachment.htm>