[TR] ref: TR Throwout bearing - grinding at midpoint of clutch
Q
HDRider570 at att.net
Wed Nov 4 14:22:44 MST 2020
You should check the end-play on the crankshaft as it could be that the
thrust bearing has failed. Push on the front pulley till the crank will
move no further backwards, have someone push the clutch pedal as you
observe the harmonic damper/pulley for movement forward. The spec is
about .004. If the bearing has fallen out it will about a 1/4" or more.
Edward Hamer
Petaluma CA
More information about the Triumphs
mailing list