[TR] TR3A hood rattle woes
anabil007
anabil007 at comcast.net
Sun Nov 1 10:27:14 MST 2020
Hi Jim...my TR3 (57, small mouth)...would give me more worries if it did Not rattle, but the bonnet (hood) ... I learned that lesson when I forgot to lock the dzus down in a test run after some work was done...got whacked on the head, broke the windshield, and the bonnet was toast... so I have rattling but nothing falls off so I’m good.🥴
These cars were made to drive...so just have fun.
Best Wishes 🤞
Bill Pugh
Wallace, CA
> On Nov 1, 2020, at 7:16 AM, Jim Henningsen <trguy75 at gmail.com> wrote:
>
> Ok, have had a bit of a challenge getting rid of a rattle at front of the
> hood on the 3A. I can't tell if it is the dzuz fasteners on the sides or
> the main striker in the middle. I put a rubber cap on the striker shaft and
> that helped, but then it came back. Any ideas? Do the side fasteners need
> a thin rubber washer between the hood and fastener underneath?
> Any ideas appreciated.
> Rattles in Ocala
> Jim Henningsen
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/anabil007@comcast.net
More information about the Triumphs
mailing list