[TR] Commission Plate Rivets
Frank Fisher
yellowtr3 at yahoo.com
Sat Jun 20 18:10:02 MDT 2020
hi brianyes i found the rivets you need.problem is i had to buy a minimum of 100.
id need to go search my records if no one else has some
frank
On Saturday, June 20, 2020, 08:36:01 AM PDT, Brian Thomas <thomasb at queensu.ca> wrote:
Hi,
I'm looking to replicate the 4 rivets used to mount the commission plate on my TR2.
Pop rivets I am familiar with have a hollow center when the rivet is installed. The ones used to hold the plate leaves a metal cap in this opening.
Has anyone had success finding this type of rivet?
FYI, Rimmers shows "713531 - Pop Rivet - Closed End Type - 1/8 inch x 1/4 inch" for this application and TRF subs 554407 for this. As 554407 is also used to hold down the chrome capping on the top of a TR4A windshield (which I have), I had a look and the rivets used there are also hollow ...
Cheers,
Brian
_____________________________________________________
Brian Thomas E-Mail: Brian.Thomas at QueensU.Ca
92 Wyona Lane Phone: 613-385-1947
Wolfe Island, Ontario Toys: 54 TR2, 56 TR3, 67 TR4A,
Canada K0H 2Y0 01 XKR, 75 John Deere 920
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200621/5f67f7b7/attachment.htm>
More information about the Triumphs
mailing list