[TR] Commission Plate Rivets

[bill beecher]

Tom,
Yes, that’s what I have always heard too. 
Bill

Serenity Now......

On Jun 20, 2020, at 1:10 PM, Tom Householder <trhouse at columbus.rr.com> wrote:

I looked into this once and believe it is called a blind rivet…… Could be mistaken….. long time ago



>> On Jun 20, 2020, at 12:08 PM, DAVE HOGYE <dlhogye at comcast.net> wrote:
>> 
>> This is excellent information and a detail most would overlook.  I reduced the cap diameter of an otherwise correctly sized aluminum pop rivet then glued a short length of the shaft in place to smoothly fill the hole.  It's very difficult to tell the difference from the factory rivet.  I thought this detail was important and I kept the original commission plate although it shows it's age. 
>> Dave H.   
>> On 06/20/2020 8:47 AM Don Hiscock <don.hiscock at gmail.com> wrote:
>> 
>> 
>> Yes, I think I was able to find the correct rivets for both early cars (a drive rivet, not a "pop" rivet) and late cars (a closed-end rivet).  If not exact, they're *very* close.  I probably have many dozens of them -- certainly several lifetime's supply -- because I had to order a bunch to get a few.
>> 
>> Here's are details front and back of the early drive rivet.
>> https://photos.smugmug.com/photos/i-KX88bMw/0/a2ee6789/O/i-KX88bMw.jpg 
>> https://photos.smugmug.com/photos/i-LdxQ2BM/0/c84b7900/O/i-LdxQ2BM.jpg 
>> 
>> Send me a note off-list, Brian, and we'll see what we can do.
>> 
>> BR,
>> 
>> Don
>> Saint Louis Missouri
>> 1962 TR3B TSF202L
>> 
>> 
>> On Sat, Jun 20, 2020 at 10:35 AM Brian Thomas < thomasb at queensu.ca> wrote: 
>> Hi, 
>> 
>> I'm looking to replicate the 4 rivets used to mount the commission plate on my TR2.  
>> 
>> Pop rivets I am familiar with have a hollow center when the rivet is installed.  The ones used to hold the plate leaves a metal cap in this opening.  
>> 
>> Has anyone had success finding this type of rivet?  
>> 
>> FYI, Rimmers shows "713531 - Pop Rivet - Closed End Type - 1/8 inch x 1/4 inch" for this application and TRF subs 554407 for this.  As 554407 is also used to hold down the chrome capping on the top of a TR4A windshield (which I have), I had a look and the rivets used there are also hollow ... 
>> 
>> Cheers, 
>> 
>> Brian 
>> _____________________________________________________ 
>> Brian Thomas                             E-Mail:  Brian.Thomas at QueensU.Ca 
>> 92 Wyona Lane                          Phone:  613-385-1947 
>> Wolfe Island,  Ontario                  Toys:  54 TR2,  56 TR3,  67 TR4A,  
>> Canada  K0H 2Y0                                       01 XKR,  75 John Deere 920 
>> 
>> 
>> ** triumphs at autox.team.net ** 
>> 
>> Donate: http://www.team.net/donate.html 
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive 
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com 
>> ** triumphs at autox.team.net ** 
>> 
>> Donate: http://www.team.net/donate.html 
>> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive 
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dlhogye@comcast.net 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/trhouse@columbus.rr.com

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200620/069be4db/attachment.htm>