[TR] How to tell the size of bolt or setscrew from the part number?

[Don Hiscock]

Do you have a copy of the S-T Hardware Catalog, Sujit?  It's most helpful
to track part number to part details.  There's a .pdf version on Randall's
Google Drive collection of Triumph files.

On Wed, Jun 17, 2020 at 1:46 PM Sujit Roy <triumphstag at gmail.com> wrote:

> I've been trying to figure this out, but am at a loss. Please help
>
> I have a part number in my parts book.  I also have the standard Triumph
> parts list.
>
> HU910
>
> HU is set screw and I'm assuming is fully threaded.
> HB on the other hand is a bolt and has a shoulder
> I'm assuming the 9 is the bolt diameter.  Am I on the right track?
> What is the 1 and 0 and can I tell from it, if it is a NC or NF thread?
>
> I'm aware later Triumph switched the part no. system and that system is
> more confusing.
> Regards, Sujit
> --
> Sujit Roy
> Cupertino, California
>
> https://triumphstagblog.wordpress.com/
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200617/7b9e7b99/attachment.htm>