[TR] Rear Seal Installation on TR4/4A/5/250 Hardtop

[John Linney]

It is glued to the hardtop. If it were glued to the backlight, I doubt you would get the Surrey Top canvas sticks to fit properly.  It would also look terrible. There’s a fur flex strip that goes completely around the backlight and door openings.


> On Jul 28, 2020, at 9:23 AM, <keithstewart at bell.net> <keithstewart at bell.net> wrote:
> 
> Does anyone have experience with the correct installation of the rear seal for the hardtop to backlight on these models? Most vendors TRF, Moss, Rimmers, Revington, etc.) “imply” that the seal is attached to the rear surface of the hardtop. However, on my original 67 TR4A (36 000 miles), the seal is glued to the top horizontal surface of the backlight. Your thoughts and wisdom are most welcome.
>  
> Keith Stewart
> keithstewart at bell.net <mailto:keithstewart at bell.net>
>  
>  
> ** triumphs at autox.team.net <mailto:triumphs at autox.team.net> **
> 
> Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
> Archive: http://www.team.net/pipermail/triumphs <http://www.team.net/pipermail/triumphs>  http://www.team.net/archive <http://www.team.net/archive>
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/john@linneyweb.com <http://autox.team.net/mailman/options/triumphs/john@linneyweb.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200728/d5f85a17/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PastedGraphic-10.tiff
Type: image/tiff
Size: 532444 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200728/d5f85a17/attachment.tiff>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_2628.jpeg
Type: image/jpeg
Size: 59048 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200728/d5f85a17/attachment.jpeg>