[TR] TR4 Hood Badge

[Jim Henningsen]

Thanks, Jim

-----Original Message-----
From: John Macartney <John.Macartney at Ukpips.org.uk> 
Sent: Monday, February 17, 2020 12:29 PM
To: wbeech <wbeech at flash.net>
Cc: Jim Henningsen <trguy75 at gmail.com>; Triumphs <Triumphs at autox.team.net>
Subject: Re: [TR] TR4 Hood Badge

I agree with Bill Beecher. Elongate one of the holes with a round needle file and then touch in the bare metal with a small dab of of body colour to impede rust. The retaining spire clips will hold it tight and snug.

Jonmac

At the Battle of Waterloo, 1815:
Lord Uxbridge:  “By God, Sir - I’ve lost my leg”
Duke of Wellington: “By God, Sir - so you have!”


> On 17 Feb 2020, at 17:15, wbeech <wbeech at flash.net> wrote:
> 
> IF you elongate the hole a little to fit, it will be hidden.  It will 
> still be a snug fit as the posts will occupy the maximum length.  If 
> still unsure you could repack the void with some clear JB Weld or other filler.
> Bill B
> TS30800L
> 
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of 
> Jim Henningsen
> Sent: Monday, February 17, 2020 10:08 AM
> To: 'Triumphs' <Triumphs at autox.team.net>
> Subject: [TR] TR4 Hood Badge
> 
> Ordered a new enameled hood badge as the body shop had tried to bend 
> it to fit the holes and cracked the enamel.  The holes on my 62 TR4 
> hood are not quite matching up with the aftermarket hood badges.  This 
> one is from England.  Any thoughts on fixing this before I experiment.  
> Badges ae too expensive to try and bend the mounting tips.  I am 
> thinking I need to shave one of the holes on a top or bottom side to 
> increase length between holes. I know this may allow badge to shift 
> after install, but what options are there?
> Thanks
> Jim Henningsen
> Ocala FL
> 61 TR3A
> 62 TR4
> 75 TR6
> 81 TR8
> 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  
> http://www.team.net/archive
> 
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  
> http://www.team.net/archive
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/john.macartney@ukpips.o
> rg.uk