[TR] TR4 Hood Badge

[Keith Stewart]

The original securing mechanism was small plastic inserts (like those ground bullet connectors that have a hole through the bottom for the ground wire to protrude and bend over). Once the hole(s) is elongated, these would not work but spire nuts as John suggests or spring clips should hold it secure.


Keith Stewart
keithstewart at bell.net



-----Original Message-----
I agree with Bill Beecher. Elongate one of the holes with a round needle file and then touch in the bare metal with a small dab of of body colour to impede rust. The retaining spire clips will hold it tight and snug.