[TR] clutch for pin

[Irv Korey]

On Fri, Feb 7, 2020 at 2:19 PM Sujit Roy <triumphstag at gmail.com> wrote:

> I've been deciding whether to fit a stronger clutch fork pin to my Triumph
> than the original type.
> <http://autox.team.net/mailman/options/triumphs/emanteno@gmail.com>


You are better off cross drilling the shaft and fork, and inserting a roll
pin or bolt in there as well as the fork pin.
If you do this, you will never have a broken fork pin ever again. There are
plenty of places on the Internet where you can
read/view this to see how it should be done. Easy peasy.

Irv Korey
74 TR6 CF22767U
Highland Park, IL
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200207/f5513144/attachment.htm>