[TR] recommendations for using an insert

[Sujit Roy]

What is the best way to drill a perpendicular hole for an insert?
I'm using a 7/16-20 time sert. I need to drill a perpendicular hole in the
captive nut. The dril I need to use is 29/64. Should I  start with
drilling  smaller diameter holes and then end up with the 29/26?
Im thinking of drilling a perpendicular hole in a piece of wood in my drill
press and then using that as a guide.
Any recommendations please. The last time I used an insert, the hole wasn't
perpendicular.

Sujit

-- 
Sujit Roy
Cupertino, California

https://triumphstagblog.wordpress.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201203/876e9342/attachment.htm>