[TR] Hoses to carbon canister for Triumphs similar to that used on a TR6

[Sujit Roy]

That's the back up plan. They don't look as nice though.
Regards.

On Wed, Aug 26, 2020 at 9:23 AM DAVID MASSEY <dave1massey at cs.com> wrote:

> If you can't find it you can get some barbed right-angle fittings and make
> the sharp turns using those.
>
> Dave
>
>
>
> -----Original Message-----
> From: Sujit Roy <triumphstag at gmail.com>
> To: Triumphs <triumphs at autox.team.net>
> Sent: Wed, Aug 26, 2020 11:13 am
> Subject: [TR] Hoses to carbon canister for Triumphs similar to that used
> on a TR6
>
> I need to get some hoses for my Stag. I don't think they are available.
> This is from a TR6 and the hoses are similar to hoses 27 and 29.
> The canister in the Stag sits quite high under the hood  and I'd like to
> get preformed 90 degree angled hoses. Are the hoses for the TR6 performed?
> If so, then TRF probably has the correct ones. Can someone confirm?
>
> Regards, Sujit
>
>
>
> [image: canister.jpeg]
>
>
> --
> Sujit Roy
> Cupertino, California
>
> https://triumphstagblog.wordpress.com/
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
>


-- 
Sujit Roy
Cupertino, California

https://triumphstagblog.wordpress.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200826/8d28576a/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: canister.jpeg
Type: image/jpeg
Size: 51909 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200826/8d28576a/attachment.jpeg>