[TR] Hoses to carbon canister for Triumphs similar to that used on a TR6

[DAVID MASSEY]

 If you can't find it you can get some barbed right-angle fittings and make the sharp turns using those.
 
Dave 

 
 
-----Original Message-----
From: Sujit Roy <triumphstag at gmail.com>
To: Triumphs <triumphs at autox.team.net>
Sent: Wed, Aug 26, 2020 11:13 am
Subject: [TR] Hoses to carbon canister for Triumphs similar to that used on a TR6

I need to get some hoses for my Stag. I don't think they are available. 
This is from a TR6 and the hoses are similar to hoses 27 and 29.The canister in the Stag sits quite high under the hood  and I'd like to get preformed 90 degree angled hoses. Are the hoses for the TR6 performed? If so, then TRF probably has the correct ones. Can someone confirm?
Regards, Sujit 





-- 
Sujit Roy
Cupertino, California
https://triumphstagblog.wordpress.com/

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200826/bff9739f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: canister.jpeg
Type: image/jpeg
Size: 51909 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200826/bff9739f/attachment.jpeg>