[TR] Installing Pertronix on a 74 TR6

robert rudolphi robertrudolphi at yahoo.com
Sat Aug 15 15:54:27 MDT 2020


 Thanks Alex, very helpful
    On Saturday, August 15, 2020, 05:15:06 PM EDT, Alex & Janet Thomson <aljlthomson at charter.net> wrote:  
 
 
I’m not sure where I am jumping in on this conversation but from our experience on a ’73 TR6, make sure to feed the Pertronix unit with a full 12 volts, not the reduced voltage that you get at the coil. Yes, I also believe that there is part of the feed wire to the coil that acts as the ballast resistor. Feeding the unit “in front” of the ballast resistor would mean between the resistor and the ignition switch. When you feed the unit the reduced voltage via the resistor, it will start to cause ignition misses after 500 miles or less. Then, when you are on your way to the CT Antique Machinery Show, the car will die completely, requiring you to walk home and tow the car home with your 1952 John Deere 50 tractor. I’m glad that was only a mile and a half walk. By the way, the first time it happened, Pertronix was very helpful, providing a replacement unit under warranty with an analysis of deficient input voltage on the old unit.

  

Alex Thomson

  

From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of William Smith
Sent: Saturday, August 15, 2020 3:59 PM
To: robertrudolphi at yahoo.com
Cc: Triumph List
Subject: [TR] Installing Pertronix on a 74 TR6

  

  

Robert, I  have a 72 TR6 with a Pertronix but 72's do not have ballast resistors.  Therefore, I'm not positive of what I'm about to say, but it is my recollection that the ballast resistors in the later models are actually in the wire (positive,  I believe) going to the coil.  I'm not sure what  they mean by "in front" of the ballast resistor.....whether that means between the ignition switch and the resistor, or between the resistor and the coil

  

Bill Smith

'72 TR6 

'80 TR7 

  

  

Sent from my Verizon, Samsung Galaxy smartphone

  
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200815/15f704ec/attachment.htm>


More information about the Triumphs mailing list