[TR] stretching vinyl over wheel well

[bill beecher]

Wait for a hot sunny day, spread the vinyl out for 30 minutes, shape it to form.  Hair dryer is safer than a heat gun, both can damage the vinyl if your not careful. 
Bill


#dontkillgrandma

On Aug 4, 2020, at 10:40 AM, Bob <yellowtr at adelphia.net> wrote:


Dave,

I used a hair dryer with good results.

Bob

> On 8/4/20 11:36 AM, dave wrote:
> Would like to install some vinyl over a wheel well.  slow and careful with a heat gun?
> 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr@adelphia.net
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200804/4e76c688/attachment.htm>