[TR] Tr3a split steering shaft bushing

[Kinderlehrer]

Moss lists those as for TR2 thru TR6. I know they didn't work in my TR3A, at
least not for me. 
Bob

-----Original Message-----
From: Art McEwen [mailto:amcewen2 at cogeco.ca] 
Sent: Monday, April 27, 2020 3:22 PM
To: Kinderlehrer
Cc: triumphs at autox.team.net
Subject: Re: [TR] Tr3a split steering shaft bushing

Hi Bob, 

No not the felt one the 2 bearing/bushings that go either side of the split.
Moss part 525-020 vs 525-021

https://mossmotors.com/triumph-tr2-3-4/suspension-steering/steering/steering
-tr2-3b


> On Apr 27, 2020, at 5:56 PM, Kinderlehrer <kinderlehrer at comcast.net>
wrote:
> 
> I don't know what you mean by "unimproved" but I was not able to get 
> anything other than the felt bush to fit. I did use a piece of a 
> leather belt until I could get the felt one from TRF.
> Bob
> 
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of 
> Art McEwen
> Sent: Monday, April 27, 2020 2:41 PM
> To: triumphs at autox.team.net
> Subject: [TR] Tr3a split steering shaft bushing
> 
> So any trick to inserting them into the shaft?  How tightly can I 
> squeeze them?  My current method is to use a hose clamp like a piston 
> ring compressor.  I bought the original style "unimproved" ones.
> 
> Thanks,
> 
> Art.
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  
> http://www.team.net/archive
> 
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/kinderlehrer@comcast.ne
> t
>