[TR] Tr3a split steering shaft bushing
Art McEwen
amcewen2 at cogeco.ca
Mon Apr 27 16:22:19 MDT 2020
Hi Bob,
No not the felt one the 2 bearing/bushings that go either side of the split. Moss part 525-020 vs 525-021
https://mossmotors.com/triumph-tr2-3-4/suspension-steering/steering/steering-tr2-3b
> On Apr 27, 2020, at 5:56 PM, Kinderlehrer <kinderlehrer at comcast.net> wrote:
>
> I don't know what you mean by "unimproved" but I was not able to get
> anything other than the felt bush to fit. I did use a piece of a leather
> belt until I could get the felt one from TRF.
> Bob
>
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Art
> McEwen
> Sent: Monday, April 27, 2020 2:41 PM
> To: triumphs at autox.team.net
> Subject: [TR] Tr3a split steering shaft bushing
>
> So any trick to inserting them into the shaft? How tightly can I squeeze
> them? My current method is to use a hose clamp like a piston ring
> compressor. I bought the original style "unimproved" ones.
>
> Thanks,
>
> Art.
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/kinderlehrer@comcast.net
>
More information about the Triumphs
mailing list