[TR] Buggers. I give up!

[Frank Fisher]

 if i remember .... fat chance
you remove or un-tighten the 3 grub screws on the adapter.that release the control head. you can pull the head out..toward you.depending on how you did yours.i seem to recall somehow i slotted something so i could get a socket on the mail nut holding the wheel without disconnecting the wires.i think maybe i just took the control head apart and left the 4 wires hanging while i did it.
start with the 3 grub screws just like on the original steering wheel. 





    On Tuesday, April 7, 2020, 03:47:04 PM PDT, TERRY SMITH <terryrs at comcast.net> wrote:  
 
    This should be easy, since I've done it before, but...it's been 15 years.   
   I replaced the stock steering wheel with a MotoLita and their adapter kit.  In fact, my dash and cockpit looks pretty much like they show on page 67 of their TR3 Glove Box Companion.   
   I know I put them on the car, because...well...they're on the car.   
   I can't for the life of me remember how they went on, hence how to get the friggin' thing off so's to swap out the control head when the new one comes in.   
   Anybody remember?     
   Terry Smith, '59 TR3A  TS58667   New Hampshire   
  ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200407/fd9379fe/attachment.htm>