[TR] TR4 valve cover

[bill beecher]

Moss shows it as part 360-630, although the one on mine was much smaller.  
Bill

Stay Home, Wash Your Hands. 

On Apr 2, 2020, at 11:28 PM, Jim Mills <jbmills at roadrunner.com> wrote:


Bill’s comment begs a question or two.  My later TR4 has the valve cover vented to the carbs.  You cannot (at least I have not found any) buy any of the air filters for this system.  How do I remedy this problem?  I was told to NOT plug that vent from the valve cover.  Suggestions?  Jim Mills
 
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of bill beecher
Sent: Thursday, April 2, 2020 6:03 PM
To: dave <dave at ranteer.com>
Cc: triumphs at autox.team.net
Subject: Re: [TR] TR4 valve cover
 
Isn’t you valve cover vented to the carbs?  Maybe a plugged PCV valve?  If so, I would think you should not have a vented cap.  
Bill

Stay Home, Wash Your Hands. 

On Apr 2, 2020, at 7:41 PM, dave <dave at ranteer.com> wrote:


My early TR4 (9,XXX) spits oil all over its nice chrome valve cover from the breather cap
 
Is there anything I can do about it other than clean it often?
 
Btw it has 89 mm pistons, mild cam, polished/ported/shaved head, etc
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200403/8e65bde7/attachment-0001.htm>