[TR] Aluminum head?

[Paul Dorsey]

Thanks!

On Mon, Sep 2, 2019 at 9:18 PM Wbeech at flash.net <wbeech at flash.net> wrote:

> Yes, Moss carries an aluminum head, about $3,000.  I don’t worry about any
> sequence for loosening, for tightening  use the sequence in the book, after
> tightening to 50ftlbs tighten in steps of 20ftlbs through the sequence
> until you get to the specified 105ftlbs.
> Bill
>
> Sent from my IBM 8088
>
> On Sep 2, 2019, at 8:10 PM, Paul Dorsey <dorpaul1 at gmail.com> wrote:
>
> Gotcha!  I may be dumb but   I I am dumb, but,I’m no dummy, I don’t have
> an aluminum head on my motor. Do theymake aluminum heads for our motor or
> do they? Anyway they’re out of my price range.
>
>   As I was loosening the bolts that hold the head on,  I got to thinking,
> I wonder if there is a sequence for loosening these head nuts .   Metal
> bends, You know. Perhaps that is more critical for something like aluminum
> heads.
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190902/600a42d7/attachment.html>