[TR] Aluminum head?

[Wbeech@flash.net]

Yes, Moss carries an aluminum head, about $3,000.  I don’t worry about any sequence for loosening, for tightening  use the sequence in the book, after tightening to 50ftlbs tighten in steps of 20ftlbs through the sequence until you get to the specified 105ftlbs.  
Bill

Sent from my IBM 8088

On Sep 2, 2019, at 8:10 PM, Paul Dorsey <dorpaul1 at gmail.com> wrote:

Gotcha!  I may be dumb but   I I am dumb, but,I’m no dummy, I don’t have an aluminum head on my motor. Do theymake aluminum heads for our motor or do they? Anyway they’re out of my price range.
  
  As I was loosening the bolts that hold the head on,  I got to thinking, I wonder if there is a sequence for loosening these head nuts .   Metal bends, You know. Perhaps that is more critical for something like aluminum heads.

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net