[TR] removing my head

[Paul Dorsey]

Your right, those were engine removing instructions.  Was I suppose to
remove the rocker arm first?  Do I need to remove the manifolds before
loosening the head?
If so, then I might have already screwed up.  With all eight head bolts
loosened will I possibly do any loosening of the piston sleeves by trying
to break the manifolds loose?  Without the manifolds off, I didn't get the
head out.  Oh well, always tomorrow.


On Mon, Sep 2, 2019 at 12:20 PM Wbeech at flash.net <wbeech at flash.net> wrote:

> Paul,
> That sounds more like the instructions for engine removal, not just the
> head.  You pull straight up to remove the head so as not to bind on the
> studs.
> Bill B
>
> Sent from my IBM 8088
>
> On Sep 2, 2019, at 10:51 AM, Paul Dorsey <dorpaul1 at gmail.com> wrote:
>
> why does the online manual tend to  say the engine needs to be kinda
> tilting backwards?
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190902/b7fd2491/attachment.html>