[TR] TR4A Body to Frame Attachment

[Cliff Hansen]

I don’t recognize that plate, and I’m sure a similar plate is not sold with the body mounting kits. Maybe it was a reinforcement for the trunk floor where the spare tire hold down goes through?

Cliff


Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: Triumphs <triumphs-bounces at autox.team.net> on behalf of Keith Stewart <keithstewart at bell.net>
Sent: Tuesday, October 22, 2019 8:44:19 AM
To: triumphs at autox.team.net <triumphs at autox.team.net>
Subject: [TR] TR4A Body to Frame Attachment


The TR4A body is attached to the frame using two rectangular plates. When disassembled, my notes show these plates:

[cid:image003.jpg at 01D588C5.A85930D0]

But I did not note where or what orientation these plates had. I believe the originals were painted black. I am hoping someone kept better notes than I did and can help out with the location and orientation. Thanks in advance for any info and photos.



Keith Stewart

keithstewart at bell.net


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20191022/b83f0df2/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 17939 bytes
Desc: image003.jpg
URL: <http://autox.team.net/pipermail/triumphs/attachments/20191022/b83f0df2/attachment.jpg>