[TR] tr250 wiring

[Randall]

The wire functions are probably not an exact match for the TR250 diagram; in
particular there may be no IND output at all from the alternator.

The information I'm looking at (which may or may not actually match your
alternator) says early Delco units used "F" and "R" terminals; with F being
control voltage to the rotor (which is grounded to the case), and "R" being
an AC voltage to operate the relay contained inside the external regulator
box.  If there is an IND output for the dash lamp, it will be a 4th terminal
on the regulator.

Since you are reworking things anyway, have you considered using a more
modern alternator?  Unlike Ford, GM almost immediately went to an internally
regulated alternator.

-- Randall 
56 TR3 TS13571L once and future daily driver
71 Stag LE1473 - awaiting engine rebuild
71-2-3 Stag - awaiting gearbox rebuild 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Delco external regulator.JPG
Type: image/jpeg
Size: 81765 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190502/14a0b027/attachment.jpe>