[TR] TR3A Nut behind the wheel

[Wbeech@flash.net]

Never had that problem with any TR3s past or present.  If you have enough thread I don’t see why a lock washer, split or star, would not work for you.   Or, if you can find a Stover nut of the correct threads.  

Bill B
TS30800L (No. 6)

Sent from my DynaTAC 8000X

On May 1, 2019, at 8:47 AM, Art McEwen <amcewen2 at cogeco.ca> wrote:

In this case not the driver but literally the nut that holds the steering wheel on:   Is there a lock washer mechanism that I (and the parts diagrams) are missing or is it just a given that every few months I have to loosen the trafficator housing and tap that nut tighter with a flat screwdriver and hammer?

Cheers,

Art
'60 TR3.
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net