[TR] Eastwood Gas Tank Kit

[Chris Simo]

So..... I knew i needed to coat my gas tank since the car was so old as
well as the condition of my TR4 tank.
To see just how bad it was, I gutted a usb cam and dropped it down my TR2
gas tank expecting to see the worst. It looked great. My tank is galvanized
inside and out.

Anyone else have one like this?

Sent from my TRASH-80

On Mon, Jul 15, 2019, 7:38 AM Randy and Valerie DeRuiter <
deruiterville at hotmail.com> wrote:

> Hi Brian-
>
> I may be in the minority, but I am not a fan of the internal coating
> product as I had one fail in my TR4 and progressively small bits of the
> coating would clog the fuel line and give other troubles at the fuel pump.
> I did not install the coating myself, just inherited it when I purchased
> the car.
>
> If the tank is sound I'd consider some rust remover/mechanical agitation
> to sort it out and leave it as is.
>
> That is an early car, good luck with it - I'm about 40 minutes south of
> you depending on the timing of the Cape Vincent ferry if you have need for
> a part.  Most of my stuff is for 3As though.
>
> Cheers
> Randy
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ccsimonsen@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190716/d344dcc6/attachment.html>