[TR] vacuum advance

[TERRY SMITH]

Whoops, I see the nuances of the English language have struck again.  I didn't mean that Randall MADE the shield, but rather that it was on hjs car (I think) and the picture was something he sent to illustrate a point to someone.  My interest is in the vacuum hookup because the way he has it in the picture makes sense. 

> On July 8, 2019 at 11:54 AM dave <dave at ranteer.com> wrote:
> 
> 
>     You can clearly see that it is made by ARE – Alexander Racing Enterprises.  I have his (triple carb)  heat shield on my TR6.
> 
>      
> 
>     From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of TERRY SMITH
>     Sent: Monday, July 8, 2019 10:27 AM
>     To: triumphs <triumphs at autox.team.net>
>     Subject: [TR] vacuum advance
> 
>      
> 
>     Here's a pic I ran across of Randall's? heat shield. 
> 
>      
> 
>     What I notice is that the vacuum advance pipe ends in a female.  Is so's to make disconnecting easier and save those fragile aluminum thread in the carb body? 
> 
>      
> 
>     Terry Smith
> 
>      
> 


 

> ** triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/terryrs@comcast.net
> 


 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190708/88ba6e3f/attachment.html>