[TR] TR3 oil pumps and oil pans

Frank Fisher yellowtr3 at yahoo.com
Thu Jan 31 10:52:11 MST 2019


 thanks every one.thanks Randall....yes download the Bentley on the phone is not a lot of help. would still need a magnifying glass. 
    On Thursday, January 31, 2019, 8:26:37 AM PST, Randall <TR3driver at ca.rr.com> wrote:  
 
 The cork sounds like maybe the ones that go on either side of the front
sealing block.  You might need to cut them to fit, though.  ISTR the
originals were smaller than 1" square, but had a tab that sticks out on one
side.

No real need for dressing on that gasket; won't matter a bit if it weeps a
little.  But ISTR I smeared some Hylomar on there last time anyway, just for
luck.

BTW, here's a PDF of the workshop manual (which "the Bentley" is a copy of).
It's not real handy on a smart phone, but at least marginally useful.
https://drive.google.com/open?id=0B2H2NJt34OffYWZiN2VlZGMtNTkxMi00NGUzLWE4Nz
MtMGRkODRkYzU3MDU1

-- Randall 
56 TR3 TS13571L once and future daily driver
71 Stag LE1473 - awaiting engine rebuild
71-2-3 Stag - awaiting gearbox rebuild 
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190131/27ae1a00/attachment.html>


More information about the Triumphs mailing list