[TR] Stag exhaust mounting

[Sujit Roy]

Attache's vertically to the j type OD. Near the end of the OD.

On Sun, Feb 3, 2019, 7:24 PM Sujit Roy <triumphstag at gmail.com wrote:

> Thinking out load. It could be be for cars fitted with j type OD.
>
> On Sun, Feb 3, 2019, 10:59 AM Frank Magnusson <fmags at cox.net wrote:
>
>>
>> Hi all,
>>
>> I've got a question on the exhaust mounting on a Stag.
>>
>> I'm fitting a new stainless exhaust system from Rimmers and a bracket
>> came with the mounting kit (158382) which is shown as the mounting bracket
>> for the downpipes at the end where they attach to the mufflers.  On the
>> gearbox, the upper mounting bracket thst attaches to the tailshaft has a
>> bracket coming off it that drops down with two holes in it.  My old
>> downpipes were attached directly to this bracket.
>>
>> So where does this exhaust mounting bracket go and what does it attach
>> to?  Its triangular so to speak and has 3 mounting holes.  2 would attach
>> to the downpipes presumably, but where does that bracket attach to with the
>> 3rd hole?  The catalog shows a bolt with no nut implying it screws into a
>> nutplate.  Does this bracket attach to one of the holes on the gearbox
>> upper mounting bracket?
>>
>> Stumped.  A picture would help.  Mine is a manual gearbox with A type OD,
>> but it looks like the gearbox upper mounting bracket and this downpipe
>> mounting bracket are common to all except the type 65 box.
>>
>> Any help appreciated.
>>
>> Thanks,
>> Frank
>> '72 Stag
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs
>> http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190203/f426b6a0/attachment.html>