[TR] Stag exhaust mounting

[Sujit Roy]

Thinking out load. It could be be for cars fitted with j type OD.

On Sun, Feb 3, 2019, 10:59 AM Frank Magnusson <fmags at cox.net wrote:

>
> Hi all,
>
> I've got a question on the exhaust mounting on a Stag.
>
> I'm fitting a new stainless exhaust system from Rimmers and a bracket came
> with the mounting kit (158382) which is shown as the mounting bracket for
> the downpipes at the end where they attach to the mufflers.  On the
> gearbox, the upper mounting bracket thst attaches to the tailshaft has a
> bracket coming off it that drops down with two holes in it.  My old
> downpipes were attached directly to this bracket.
>
> So where does this exhaust mounting bracket go and what does it attach
> to?  Its triangular so to speak and has 3 mounting holes.  2 would attach
> to the downpipes presumably, but where does that bracket attach to with the
> 3rd hole?  The catalog shows a bolt with no nut implying it screws into a
> nutplate.  Does this bracket attach to one of the holes on the gearbox
> upper mounting bracket?
>
> Stumped.  A picture would help.  Mine is a manual gearbox with A type OD,
> but it looks like the gearbox upper mounting bracket and this downpipe
> mounting bracket are common to all except the type 65 box.
>
> Any help appreciated.
>
> Thanks,
> Frank
> '72 Stag
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190203/5478d08b/attachment.html>