[TR] Front Crank seal

[Paul Tegler]

a round wood block, or as I use, a 1" drive large size socket and a dead 
blow hammer can set them easily and squarely

ptegler

On 12/8/2019 1:11 PM, Jim Vass wrote:
> I'll be watching as my other friend removes it then presses in the new 
> one.
> Now that I know what can go wrong it's fairly easy to see if the seal 
> is sitting properly in the cover.
> I suspect that this seal was slightly bigger than the old one hence 
> was very hard to press in squarely.
> There's very very little space between the seal and the oil slinger so 
> the seal has to be all the way in.
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net

-- 
Paul Tegler
ptegler at verizon.net  www.teglerizer.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20191208/50f3d6ed/attachment.htm>