[TR] Front Crank seal

[Jim Vass]

I'll be watching as my other friend removes it then presses in the new one.
Now that I know what can go wrong it's fairly easy to see if the seal is
sitting properly in the cover.
I suspect that this seal was slightly bigger than the old one hence was
very hard to press in squarely.
There's very very little space between the seal and the oil slinger so the
seal has to be all the way in.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20191209/2dbdc44e/attachment.htm>