[TR] TR6 engine replacement idea

James Henningsen trguy75 at gmail.com
Sun Apr 21 11:52:23 MDT 2019


Good idea on the ford rear end but agree that Nissan diff should be robust enough with updated half shafts.  Thanks for the note 
Jim

Sent from my iPhone

> On Apr 19, 2019, at 2:36 PM, DAVID MASSEY <dave1massey at cs.com> wrote:
> 
> Many years ago there was a guy at the British V8 convention in Cleveland with a Ford 2.3 turbo (not the ecoboost but the earlier generation) with a huge intercooler and putting out about that much HP.  He had the V8 MGB's running scared.
> 
> If one were to do that the stock diff and half shafts will not survive.  Part of just such a conversion will be a better diff (eg: Rich Good's Nissan conversion).  Now that Ford finally put IRS under the Mustang there may be an opportunity there.  
> 
> 
> 
> Dave 
> 
> 
> 
> -----Original Message-----
> From: James Henningsen <trguy75 at gmail.com>
> To: triumphs <triumphs at autox.team.net>
> Sent: Fri, Apr 19, 2019 1:14 pm
> Subject: [TR] TR6 engine replacement idea
> 
> Has anyone tried to install the ford 2.3 liter eco boost turbo motors in a 6. Designed for rear wheel drive, not too big, lightweight, and has a 6 speed manual tranny.  310 horsepower.  These babies haul.  The 2018 mustang with this motor does 0-60 in under 5 seconds  Amazing for a 4 cylinder.  There are olenty of these low
> Mileage motors in the recycle yards from accidents.  Seems like it would be a great fit.  If I didn’t already have a rebuilt 6 cylinder to try to figure how to do it. 
> Jim Henningsen 
> Ocala fl
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190421/5c733291/attachment.html>


More information about the Triumphs mailing list