[TR] slightly higher sitting nut?

[Paul Dorsey]

Thanks!What do you think the torque value might be?
Thanks, Paul

On Mon, Sep 24, 2018 at 10:13 PM Wbeech at flash.net <wbeech at flash.net> wrote:

> No worries.  As long as all four are equally tight/torqued you’re OK.
> Quite possibly that stud is longer or just not threaded as far into the
> head.
> Bill
>
> Sent from my Handspring Treo
>
> On Sep 24, 2018, at 7:38 PM, Paul Dorsey <dorpaul1 at gmail.com> wrote:
>
> It doesn't really bother me, but I've noticed something odd about my
> engine;  Of course there are four 9/16" nuts holding the rocker arm to the
> head.  Initially all 4 nuts were tight, however, nut #4 (rear nut) was two
> or three threads higher on it's stud.  It's okay that it's higher, right?
> In time, I intend on finding the torque value for all four nuts.  Is this
> listed in the workshop manual?
>
> Thanks, Paul Dorsey
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180925/8352f4e0/attachment.html>