[TR] TR4 radiator shroud

glemon at neb.rr.com glemon at neb.rr.com
Mon Sep 24 22:52:55 MDT 2018


No, but I had the pleasure of fabricating some return duct work on my house remodel project.  As I recall I bought a 2' x 4' sheet or  something like that. They are made to be fabricated into a duct, cut a little bigger than you think you will need, bend over a piece of lumber or saw horse (presumably you  need a fairly simple upside down "U" shape slightly wider at the front than the radiator end) make it nice by doing a little bend over on the last 1/4" or so it will be safer and look professional. 

The best part is figuring out the fasteners, trip to the hardware store "can I help you find what you are looking for" You make a snap judgement on the hardware clerk and either explain the whole project and hope for a point in the right direction or just say "not sure, I will know it when I see it".

Hope that is of some help, maybe somebody will have a more well formed plan than that.

Greg Lemon
TR250

---- dave <dave at ranteer.com> wrote: 
> Has anyone build their own radiator shroud?  My car came with what I can
> only assume is a custom radiator and no shroud.  I purchased a TR4 radiator
> shroud from Moss and it doesn't come close to fitting.
> 



More information about the Triumphs mailing list