[TR] SU H6 Carb Question

[Paul Tegler]

with holes in the bottom of the piston how is a vacuum being created?
main spring in place?

Are you trying to do this with the damper plungers in place?

The 'click' is simply IS the piston seating completely

ptegler


On 9/15/2018 11:13 AM, Paul Dorsey wrote:
>  At some point, I was going to ask the group if I were doing things 
> improperly here. The only way I can get the piston to drop  with a 
> click is to leave the assembly  untightened. What should I do?
>
> On Sat, Sep 15, 2018 at 9:52 AM James Henningsen <trguy75 at gmail.com 
> <mailto:trguy75 at gmail.com>> wrote:
>
>     Thanks.  I installed that way and now working on centering jet
>     properly.  My first time doing these do not in a big hurry.
>     Curious thing is I do t get the “click” of the piston when it
>     falls to base while testing jet center.   Even without the shoe
>     jet assembly installed it doesn’t click.  Seems to be the vacuum
>     in the chamber is acting as a shock absorber. I’m going to try I a
>     different cover assembly with piston to see if better fit.  Good
>     news is I have a spare set.
>     Thanks,
>     Jim
>
>     Sent from my iPhone
>
>     > On Sep 15, 2018, at 1:26 AM, Wbeech at flash.net
>     <mailto:Wbeech at flash.net> <wbeech at flash.net
>     <mailto:wbeech at flash.net>> wrote:
>     >
>     > The shoulder should be flush with the base of the piston.  I
>     insert it just a little high then use a straightedge to bring down
>     to flush.  This way I know they are both equally positioned.
>     > Bill
>     > TS30800L
>     >
>     > Sent from my Handspring Treo
>     >
>     > On Sep 14, 2018, at 11:08 PM, Jim Henningsen <trguy75 at gmail.com
>     <mailto:trguy75 at gmail.com>> wrote:
>     >
>     > When inserting a new needle into the damper piston bottom, does
>     the needle
>     > go all the way to "bottom out" in the hole, then secure with set
>     screw.  Or
>     > does it go down before bottoming out so the wider shoulder of
>     the needle is
>     > flat with base of piston?  SU H6 carb for TR3A.
>     > Thanks,
>     > Jim Henningsen
>     > Ocala FL
>     >
>     > ** triumphs at autox.team.net <mailto:triumphs at autox.team.net> **
>     >
>     > Donate: http://www.team.net/donate.html
>     > Archive: http://www.team.net/pipermail/triumphs
>     http://www.team.net/archive
>     >
>     > Unsubscribe/Manage:
>     http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
>     >
>     ** triumphs at autox.team.net <mailto:triumphs at autox.team.net> **
>
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs
>     http://www.team.net/archive
>
>     Unsubscribe/Manage:
>     http://autox.team.net/mailman/options/triumphs/dorpaul1@gmail.com
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net

-- 
Paul Tegler
ptegler at verizon.net  www.teglerizer.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180915/1564e2fe/attachment.html>