[TR] Sufficient air filter space?

[Randall]

> Are the filter-mounting holes the same distance/dimension on 
> the HS6 and the H6 carbs?

Yes, at least for the TR4A version of HS6.  (But some HS6 apparently use 3
filter mounting bolts.)  I run HS6 paper element filters on my TR3 with H6
carbs.

However, they don't clear the inner fenders.  Even after some massage with a
BFH, the bottom of the front filter is crushed from hitting the fender as
the engine moves around on it's mounts.  I also had to re-route the fuel
lines.

My long-term plan is to make up some mounting plates to use TR6-style filter
elements.  I found some nice chrome covers from Mr. Gasket that should look
nice.  But that's a back-burner project (and at this point, I think my pilot
light has gone out).

-- Randall