[TR] TR3A SU H6 Carb Rebuild Question

[TERRY SMITH]

Hi, Jim.  There are some great videos describing each detailed step of the process.  Can't remember for sure but I think this is the one I used.

https://www.bing.com/videos/search?q=su+carburetor+rebuild&&view=detail&mid=6EB3EACC193FAD72F65D6EB3EACC193FAD72F65D&&FORM=VRDGAR


Terry Smith, '59 TR3A
New Hampshire


> On September 7, 2018 at 8:28 PM Jim Henningsen <trguy75 at gmail.com> wrote:
> 
> 
> Having a spot of fun learning to rebuild my SU carbs.  Got them all back
> together with new kits and looking very nice indeed.  Throttle shaft wear
> felt very minimal so I did not replace.  Kit included new needle and float
> valves along with gaskets.  First time doing a set of SUs so please bear
> with me.  My question is where should the jet adjusting nut be set prior to
> running and setting mixture? I had hear one and half flats backed off from
> fully tightened position?  Thoughts would be greatly appreciated as I would
> like to test and adjust this weekend.  
> Cheers,
> Jim Henningsen
> Ocala FL
> 61  TR3A
> 62 TR4
> 75 TR6
> 82 Jeep CJ8
> 02 Triumph Trophy 1200 (Had to have it)
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/terryrs@comcast.net