[TR] TR6 low tension wire

[Stan Foster]

The later TR6's have a 6v coil that gets a full 12v supply during cranking then 6v during normal running. The 6v is via a resistance wire. You have the option of fitting a 12v coil and just using a fixed 12v supply. Easy to do on the 74's, just move a wire from the relay to the fuse box. On  the 73 you need to add a new wire from the fuse box to the coil.

Stan
________________________________
From: Triumphs <triumphs-bounces at autox.team.net> on behalf of Creig Houghtaling <creig555 at live.com>
Sent: Saturday, October 13, 2018 12:47:17 PM
To: triumphs at autox.team.net
Subject: [TR] TR6 low tension wire

Question:  Is the low tension wire from the coil to distributor something special?  Triumph TR6 with points.  Is it a resistor wire or something?  Or can I fabricate a wire without resistance and use that?

Thanks, Creig

Creig Houghtaling
St. Louis, MO
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181013/f116a648/attachment.html>